Installation method of leakage circuit breaker in single-phase transparent meter box

The installation method of the leakage circuit breaker in the single-phase transparent meter box is as follows:

Confirm whether the rated voltage and rated current of the leakage circuit breaker meet the requirements of the circuit, and whether the installation position of the meter box is appropriate.

Reserve the installation hole for the earth leakage circuit breaker above the meter box, and use appropriate tools to drill out the installation hole.

Insert the leakage circuit breaker into the installation hole and fix it with screws to ensure that the leakage circuit breaker is installed firmly.

Connect the power line and load line of the leakage circuit breaker to ensure that the connection is reliable and not loose.

Turn on the power, conduct a leakage test and a function test to ensure that the function of the leakage circuit breaker is normal.

Set corresponding warning signs around the leakage circuit breaker to remind users to pay attention to electrical safety and leakage protection.

In short, when installing leakage circuit breakers, it is necessary to comply with relevant safety regulations and requirements to ensure that the installation process is safe and reliable, so as to protect the safety of electrical appliances and users. If you are not sure about the installation method, it is recommended to ask a professional to install it.