Do you know the operation steps of FRP Pole Top Box for Split Energy Meter?

FRP Pole Top Box for Split Energy Meter includes two parts: single-phase Pole Top Box for Split Energy Meter and three-phase Pole Top Box for Split Energy Meter. It is suitable for the measurement, control and management of single-phase electric energy and power energy in the power supply system with AC 50Hz or 60Hz, rated working voltage to 200V, 380V and 690V and rated working current of 10A ~ 225A.

FRP Pole Top Box for Split Energy Meter method / steps:

1. The first thing to pay attention to when using FRP Pole Top Box for Split Energy Meter is to pay attention to the service conditions, because the Pole Top Box for Split Energy Meter has high requirements for temperature. A ambient temperature is - 40 ° ~ + 80 ° C, and the average temperature does not exceed + 35 °. B the air shall be clean, and the relative humidity shall not exceed 80% at 40 ° C. when the temperature is low, a higher relative temperature is allowed.

2. The cover of multi air energy and high protection FRP Pole Top Box for Split Energy Meter is made of imported weather resistant polycarbonate (PC), and the bottom is made of flame retardant ABS and PC / ABS alloy engineering plastics. It has high insulation performance, high transparency, UV resistance, aging resistance, acid rain resistance, high temperature resistance, low temperature resistance, impact strength and other properties, and has good rain proof, dust-proof, ventilation, heat dissipation and other functions, with a normal service life of more than 20 years.

3. The FRP Pole Top Box for Split Energy Meter adopts the integrated design concept, which can be installed and used in a single box or assembled by multiple boxes of incoming line from the main control box. The main switch controls the installation of multiple boxes, and the whole metering circuit is assembled in an integrated closed box. The user has separate control, which is easy to install and manage. In addition, it can prevent the power thief from touching the metering capacity and prevent the behavior of power theft.

4. The FRP Pole Top Box for Split Energy Meter has beautiful design, smooth lines, transparent and clear box cover, and reasonable layout of meter position and electrical components in the box. It is hot to discuss the installation of various types of electrical components, centralized reading collectors, etc. The box cover adopts a three-way hook to push and connect the box. A special lead sealing screw device is set in the middle under the meter position of the box cover. The lower part of the box cover is fixed and interlocked with the box with lead sealing screws and padlocks. It can be opened only by the electricity management personnel with a special lead sealing screw wrench and key. The full transparency of the box cover is convenient for the electricity management personnel to read clearly, plagiarize and timely, and can directly observe all kinds of abnormal phenomena in the box. So as to eliminate the hidden dangers of electric clock in advance and realize the management goal of "safe use of electricity and prevention first".